Rendering Styles

Overview

In the Visual Enscape Settings window, located under the Main Tab, a section named Style provides options to allow  you to change the way that Enscape renders your projects. You will notice that the Style section contains, by default, a slider named Outlines and a drop-down menu that is named Mode. These ‘Modes’ allow a user to apply unique styles to their projects and produce a Maquette or Sciographic, Hatched Sketch, Watercolor rendered image style and lots more.

To access these options, make sure Enscape is running and then open the Visual Settings window using the associated button in the Enscape Viewport user interface, as shown highlighted to the right in the following screenshot.

Visual Settings window button

Visual Settings window button

These options can be found at the top of the Visual Settings window.

Style Settings

Style Settings

These options can be combined to create some interesting effects in your projects, as the modes change the way that your project is rendered in the Enscape window, and the outlines can help emphasize the geometric forms in a project. There are five Modes that can be chosen and be combined with the Outlines option.

White Mode

When White Mode is enabled all materials, apart from transparent ones, are then displayed in white color. It is a great way to emphasize forms and volumes in a project. This style of representation is commonly used for conceptual and schematic design and gives a great overview on the interaction of spatial elements.

White Mode

White Mode

A more illustrative look can be achieved using outlines to highlight individual forms. Thickness of the outlines can be controlled using the outline slider. Here is a quick comparison of outlines varying from 0 to 75 percent:

Outline set to 0%

Outline set to 0%

Outline to set 25%

Outline to set 25%

Outline set to 75%

Outline set to 75%

White Mode Overrides

Once the White Mode is selected, you will also be able to use the white mode overrides, also known as the Selective White Mode functionality. It allows users to exclude Enscape asset categories, or specific Enscape assets from White Mode. This feature enables users to highlight important geometry, materials, or scenery while keeping other elements in a simplified white state, focusing attention on defined aspects of the project.

You can choose from the following categories to exclude:

 

  • Vegetation
  • People
  • Vehicles
  • Furniture
White Mode Overrides

White Mode Overrides

No assets excluded

No assets excluded

Vegetation excluded

Vegetation excluded

Vegetation & People excluded

Vegetation & People excluded

You can choose to exclude all instances of an asset at once using the search bar.

Or you can manually pick assets to be excluded from the White Mode by using the Select in scene option.

Additionally, an Invert Appearance option allows selected assets to appear inverted, i.e. in white, while everything else retains its original colors and materials.

The Selective White Mode functionality applies only to Enscape assets and Custom assets under Enscape Asset Library.

NOTE
  • Custom assets cannot be selected via categories in the selective white mode.
  • Individual asset selection is not supported in Rhino 7.

Polystyrol Mode

Renders all surfaces like a real polystyrol material, whereby the sunlight is scattered through the thinned geometry.
When this mode is selected, an additional setting appears named Transmission that determines how much light is transmitted through geometry.

Polystyrol Mode and Transmission Slider

Polystyrol Mode and Transmission Slider

Polystyrol mode with Transmission set to 0%

Polystyrol mode with Transmission set to 0%

Polystyrol Mode with Transmission to set 50%

Polystyrol Mode with Transmission to set 50%

Polystyrol Mode with Transmission to set 100%

Polystyrol Mode with Transmission to set 100%

You can see the effect of  0% Transmission in the following screenshots with 25% and 75% outlines applied.

Polystyrol Mode with Transmission set at 0% and Outlines set to 25%

Polystyrol Mode with Transmission set at 0% and Outlines set to 25%

Polystyrol Mode with Transmission set at 0% and Outlines set to 75%

Polystyrol Mode with Transmission set at 0% and Outlines set to 75%

Bump Maps

It’s also worth noting that bump maps will continue to be displayed when using White/Polystyrol Mode.

Bump Map with no Mode enabled.

Bump Map with no Mode enabled.

Bump Map with White Mode enabled.

Bump Map with White Mode enabled.

Bump Map with Polystyrol Mode enabled.

Bump Map with Polystyrol Mode enabled.

Light View Mode

This mode informs you as to how much light is hitting a surface and this is displayed as a heat map. It is worth noting that the Enscape Light View is not a professional or fully accurate light analysis tool, and is provided as an estimation only.

Light View with Automatic Scale enabled

Light View with Automatic Scale enabled

There is also the Automatic Scale option which can be disabled. When disabled the minimum and maximum Lux scale can be set manually.

Light View Mode with Automatic Scale disabled showing the manual adjustment sliders.

Light View Mode with Automatic Scale disabled showing the manual adjustment sliders.

In the Enscape Viewport, when Light View Mode is activated, there will always be a temp range indicator located to refer to which is located at the top of the Enscape viewport window:

Light View Temperature Gauge

Light View Temperature Gauge

This gauge will only be viewable in the Enscape window, and is not included in rendered images.

Autoscale during daylight

Autoscale during daylight

Autoscale during night time

Autoscale during night time

You can also combine Light View mode with Outlines:

Light View with Outlines set to 25%

Light View with Outlines set to 25%

Light View with Outlines set to 75%

Light View with Outlines set to 75%

Sketch Mode

This artistic visual mode recreates the rendering as pen or pencil sketches. This mode can be adjusted as black and white outlines, grayscale or as colored rendering.

Sketch Mode Settings

Sketch Mode Settings

Outlines – adjust thickness of lines.

Jitter – modulate the distortion of lines within you sketch composition.

Extended Lines – control the length and prominence of extended lines in your drawing.

Transparent Glass – enable to render objects behind glass with lighter colors.

Hatched Shadows – enhance the drawing by creating depth and form through hatched shadows

Pen in Sketch Mode without Hatched Shadows

Pen in Sketch Mode without Hatched Shadows

Pen in Sketch Mode with Hatched Shadows

Pen in Sketch Mode with Hatched Shadows

Pen – default sketch style in black and white pen.

Pencil – transform your sketch style to grayscale pencil.

Colored Pencil – customize the style of the sketch by applying colors.

Pen

Pen

Pencil

Pencil

Colored Pencil

Colored Pencil

It is recommended to use this style for still renders to achieve best results.

Exposure

Exposure

When you have Sketch Mode with hatching enabled, you can change the “Exposure” setting to affect the amount of shadows that are shown.

Saturation & Color Temperature

Saturation & Color Temperature

You can also change the saturation and color temperature to affect your results.

Watercolor Mode

The Watercolor mode transforms your viewport into a real-time watercolor painting, simulating watercolor effects to create soft, blended look for your visualization.

Watercolor settings

Watercolor settings

This mode comes with its own options to adjust the various color settings.

Color Gradient – affects the number of colors and hues.

Surface Detail – adjusts the level of texture detail on surfaces.

Bleeding Effect – controls color overlap between surfaces.

Transparent Glass – enable to render objects behind glass with lighter colors.

Default Settings

Default Settings

Increased Color Gradient

Increased Color Gradient

Increased Bleeding Effect

Increased Bleeding Effect

It is recommended to use this artistic visual mode for still renders to achieve best results.

Both Color Gradient and Bleeding Effect applied

Both Color Gradient and Bleeding Effect applied

Exposure

Exposure

When you have Watercolor Mode enabled, you can change the “Exposure” setting to affect the amount of shadows that are shown.

Saturation & Color Temperature

Saturation & Color Temperature

You can also change the saturation and color temperature to affect your results.

Glass Tints in the Watercolor Mode

Glass Tints in the Watercolor Mode


    Do you need help with Enscape? Please contact our technical support here
    or send request directly through Enscape. Don't know how? Check this article.

    Was this article helpful?

    YesNo

    Please provide us short feedback: (required)

    If you require a response to your feedback, then you will need to provide your email address below (optional)*:

    *In the framework of our postings on our website, we may ask you for your feedback on the respective posting. Here, only the input of your feedback is required. The provision of further data, such as your e-mail address, is optional. If you provide further data, such as your e-mail address, we will use this to ask you questions about the feedback, if necessary, and thus to improve our services even more specifically. The legal basis for data processing is your consent (Art. 6 s. 1 p. 1 lit. a GDPR). The granting of consent is voluntary and is given when providing the optional email address which can be revoked at any time with effect for the future. Your data will be deleted when the processing is no longer necessary to fulfill the purpose, but at the latest with the revocation of your consent.